329 products
329 products
Sort by:
If you have purchased or are using your own large tank and do not have access to insert a 19mm water barrel tap you can use a 19mm Top Hat Grommet. A 23mm hole is drilled at the bottom of the tank and the 19mm Top Hat Grommet is inserted into the hole. 19mm pipe (hosepipe) is then pushed into the grommet. This will form a water tight connection.
A replacement easy2grow (2Pot) Tray and Lid as supplied with AutoPot easy2grow modules and systems. The easy2grow Tray and Lid accepts two 8.5ltr or two 15ltr Square Pots (pots not included). The Tray and Lid may also be used with one or two AQUAplate Square Kits. The tray requires an AQUAvalve and fittings (not included) to function as part of an AutoPot Watering System. We recommend using PotSock Squares (not included) on the bases of your pots to prevent your plant’s roots from impairing the performance of the AQUAvalve
Developed by AutoPot to meet the demands of the ambitious gardener, featuring an immense 25 litre growing capacity the 1Pot XL is perfect for growers looking to cultivate BIG plants and achieve even BIGGER yields. This original design has a clam shaped tray that accommodates the large volume 25 litre XL pot. The round based pot enables the grower to easily rotate a big plant while the pot is still in the tray. Ideal for large specimen plants, such as Blueberry bushes or Japanese Maples, the 1Pot XL can be used as a single unit system or linked to larger reservoirs to create huge systems of any size or configuration. The 1Pot XL is supplied with all necessary connections and the AQUAvalves that control the water supply to each and every plant in the system, delivering fresh, balanced feed throughout their entire life cycle.
6mm in-line taps are a very useful accessory. They can be inserted in-line just after the connection to the 30 or 47 ltr tanks. Allowing you to turn off the water supply if you need to undertake any maintenance. They can also be added to the end of a layout so that now and again you can open the tap and allow the lines to be flushed, removing a sediment or lime scale build-up that might occur over time. This will only take a couple of minutes and only needs to be done every couple of weeks.
easy2GO is the ultimate holiday watering kit for happy, healthy plants. By incorporating the patented AQUAvalve, the easy2GO will keep plants watered for weeks using a simple gardening tray and water butt. The easy2GO is placed directly onto the tray along with your potted plants and distributes water to the pots from below. Unlike other holiday watering kits, the easy2GO provides optimum levels of water to meet the plants requirements – without the need for timers or electricity – ensuring you return from holiday to plants that are thriving.
Upgrade your Autopot system with the 6mm Easy2Grow Extension Kit. This extension kit includes all the necessary components for expanding your watering capabilities. With precise and efficient distribution, it allows for increased growth and healthier plants. Perfect for professional growers and industry experts.
The Autopot 6mm End Stop is a Pack of 10 that will effectively prevent any accidental spillage or leakage of your hydroponic system. Made with high-quality materials, these end stops are durable and reliable, ensuring the smooth functioning of your Autopot system.
6mm in-line taps are a very useful accessory. They can be inserted in-line just after the connection to the 30 or 47 ltr tanks. Allowing you to turn off the water supply if you need to undertake any maintenance. They can also be added to the end of a layout so that now and again you can open the tap and allow the lines to be flushed, removing a sediment or lime scale build-up that might occur over time. This will only take a couple of minutes and only needs to be done every couple of weeks.
The Autopot 6mm Straight Connector is a must-have for any irrigation system. Made with high-quality materials, this connector ensures easy and secure connection for 6mm tubing. Save time and frustration with this essential tool.
.
The Autopot 6mm Tee Connector - (C) is an essential tool for easily connecting your Autopot system. Its 6mm size ensures a secure fit, preventing leaks and allowing for efficient water distribution. Increase your plant's growth and productivity with this strong and durable connector.
The 6mm Top Hat Grommet provides a water tight connection using 6mm pipe with the 30 ltr & 47 ltr tanks. The 6mm Top Hat Grommet is positioned at the bottom of the tank, by firstly drilling a 10mm hole. The grommet is then inserted into the hole and a length of 6mm pipe is then pushed through the grommet. Push the tube through the grommet so that you can see the tube protruding inside the tank.
Developed by AutoPot to meet the demands of the ambitious gardener, featuring an immense 25 litre growing capacity the 1Pot XL is perfect for growers looking to cultivate BIG plants and achieve even BIGGER yields. This original design has a clam shaped tray that accommodates the large volume 25 litre XL pot. The round based pot enables the grower to easily rotate a big plant while the pot is still in the tray. Ideal for large specimen plants, such as Blueberry bushes or Japanese Maples, the 1Pot XL can be used as a single unit system or linked to larger reservoirs to create huge systems of any size or configuration. The 1Pot XL is supplied with all necessary connections and the AQUAvalves that control the water supply to each and every plant in the system, delivering fresh, balanced feed throughout their entire life cycle.
easy2GO is the ultimate holiday watering kit for happy, healthy plants. By incorporating the patented AQUAvalve, the easy2GO will keep plants watered for weeks using a simple gardening tray and water butt. The easy2GO is placed directly onto the tray along with your potted plants and distributes water to the pots from below. Unlike other holiday watering kits, the easy2GO provides optimum levels of water to meet the plants requirements – without the need for timers or electricity – ensuring you return from holiday to plants that are thriving.
The AirDome has been designed to increase the amount of air around the root zone in the pot. If you are lucky enough to have power in your greenhouse this little addition can increase yields by up to 130%. It is very simple to use once assembled, which will take less than 30 seconds. The AirDome is placed at the bottom of the pot, covered with the substrate of choice and then connected to an air pump.
Give your plants a lift with AirBase. This handy plate fits into the bottom of your pot during set up and allows you to sidestep the use of a pebble layer for drainage. Whilst simple, cheap, and effective, the preparation, pH balancing, and use of pebbles can be a chore. Simply drop AirBase in instead and you’re away. This essential addition even features a pop-out centre-section allowing for easy, optional integration with AirDome.
AirBase Round will fit our 25 L / 6.6 gal pots and 20 L / 5 gal fabric FlexiPots. A beautifully intuitive and effective innovation, AirBase is fabricated from tough ABS plastic making it highly durable and thus extensively reusable.
Give your plants a lift with AirBase. This handy plate fits into the bottom of your pot during set up and allows you to sidestep the use of a pebble layer for drainage. Whilst simple, cheap, and effective, the preparation, pH balancing, and use of pebbles can be a chore. Simply drop AirBase in instead and you’re away. This essential addition even features a pop-out centre-section allowing for easy, optional integration with AirDome.
AirBase Square will fit our 8.5 L / 2.2 gal and 15 L / 3.9 gal pots. A beautifully intuitive and effective innovation, AirBase is fabricated from tough ABS plastic making it highly durable and thus extensively reusable.
The AQUAvalve is supplied with all the AutoPot Watering Systems. Once connected to the water supply the AQUAvalve will control the flow of water to the plants, by simple gravity pressure from a tank or water butt, no pumps, mains water pressure, electricity or timers are required. Once connected to a tank the AQUAvalve will open and allow water to fill the tray to a preset level of 20mm. The AQUAvalve will not refill the tray until all the water has been used allowing the plant to go through a wet & dry cycle. Once all the water has been used by the plants the AQUAvalve will re-open and refill the tray. The AQUAvalve is a simple but very effective watering device and needs to be treated with care. Keep the AQUAvalve and the tray it sits in clean, free of obstructions, soil particles and it will help you water & feed your plants for many years. The AQUAvalve is guaranteed for 12 months.
Increase your plant's growth and yield potential with Autopot Clear Propogation Lid for 8.5ltr/15ltr Pots. This clear lid provides an optimal environment for your plants with improved ventilation and light penetration. Made with sturdy materials, it fits perfectly on Autopot pots of different sizes.
