Longer: 94 cm → Even more homogeneity in large areas

LED arrangement: more LEDs on the edge for even more even uniformity

Higher efficacy: 2.9 µmol/J – for every watt used, you get even more light (PPF)

Improved Spectrum for Bloom

More power: 220W → 600µmol/s

All drivers with 12V Aux. Power supply for external controllers

LED dimmer for 0 / 1-10V dimmable LED driver. No

separate power supply is required. A 1-10V signal is

generated. Plug & Play for all models of the hortiONE

V2 series. Several dimmers can be connected to

each other with an RJ11 / 12 telephone cable.

LED Flashlight green

2ft 2-tube – 48 W (2 x 24W tubes included) 600 x 230 x 60 mm.

The smallest model – ideal for lighting a propagator – or a shelf of houseplants.

Products > Plant Lighting

LightWave T5 LW48-HO

4ft 8-tube – 432 W (8 x 54 W tubes included) 1190 x 640 x 60 mm

This is the big one, designed to cover a full 1.2 metre square of useful propagation area and support hundreds of new young plants.

LUMii Contactor Timer trouble free light switching Available in 2, 4, 6 and 8 way units – all sizes boast the world leading Grasslin timer and are designed, assembled and quality checked in the UK. The LUMii contactor timers are the most robust and professional on the market. All sizes are fitted with protection covers for all sockets and floor pads for floor use. Included with two brackets, they are wall mountable and can be hung in a grow tent.

LUMii Contactor Timer trouble free light switching Available in 2, 4, 6 and 8 way units – all sizes boast the world leading Grasslin timer and are designed, assembled and quality checked in the UK. The LUMii contactor timers are the most robust and professional on the market. All sizes are fitted with protection covers for all sockets and floor pads for floor use. Included with two brackets, they are wall mountable and can be hung in a grow tent.

LUMii Daylight 315w CDM Lamp - 3200k

LUMii Daylight 315w CDM Lamp - 4200k

Maxibright - 600 Watt Magnetic Ballast Lotus (Metal)

Maxibright CFL reflector

The Maxibright CFL Reflector is a wide angle single parabolic reflector. It is a high polish, heavy duty aluminium reflector insert with rounded corners and heavy duty lamp holder spine. The heavy duty spine prevents CFL lamps sagging in the reflector keeping them in place for optimum light reflection.

Heavy duty wide angle parabolic

Optimised light dispersal

High polish aluminium

Heavy duty spine holds lamp firm & level

Ready to use with 5m power cable

BS 1363 13A plug

Maximum power 400W

Maxibright CFLs are the best on the market, giving you excellent quality and guaranteed reliability. All lamps in the Maxibright range are energy efficient with low heat output and come complete with an integrated electronic ballast. Maxibright CFLs are available in two colour temperatures to suit each plant stage: red 2700K and blue 6400K. New to the Maxibright CFL range is the Maxibright CFL Dual Spectrum 250W. The latest in horticultural technology, they are enhanced with red and blue colour temperatures to provide both essential light wavelengths throughout the growing process. As a result you are always guaranteed optimum plant yields.

The Maxibright CFL Reflector is a wide angle single parabolic reflector. It is a high polish, heavy duty aluminium reflector insert with rounded corners and heavy duty lamp holder spine. The heavy duty spine prevents CFL lamps sagging in the reflector keeping them in place for optimum light reflection.

Heavy duty wide angle parabolic

Optimised light dispersal

High polish aluminium

Heavy duty spine holds lamp firm & level

Ready to use with 5m power cable

BS 1363 13A plug

Maximum power 400W

Maxibright Dual Spectrum 600W HPS Lamp

 Maxibright Dual Spectrum 600W HPS Lamp provides 10% more light to your plants than standards hps lamps, suitable for all growth phases.

DAYLIGHT 60W 40% UVA 60% UVB LED

This UVA and UVB DAYLIGHT LED bar is a slim-line, stand-alone unit, which can also be installed as a supplemental light to an existing LED fixture. It will help to fine-tune the spectrum of any set up.

Light Radiation: 6600mW

(UVA: 6200mW UVB: 400mW)

Attach to DAYLIGHT LED lighting fixtures (480W/660W) or use independently

5000 hour lifespan

Internal LED driver: Plug and Play

Ideal as supplementary lighting

IP65 Ingress Protection

MAXIBRIGHT SUPER GROW METAL HALIDE 600W

Maxibright 600W Super Grow Halide 600W - The light produced by a Metal Halide lamp is on the end of the blue spectrum, which is high-intensity lamps, makes them the ideal lamps to use for the vegetative growth stage.

KEY VALUES:

Produces a wide spectrum with more blues than a HPS lamp.

Helps keep internodes short, producing stocky, bushy plants during the veg stage.

Produces a small amount of UVB

Fully compatible with magnetic and digital ballasts

Photosynthetic photon flux (PPF) 773umol/s

Closed-end 315W CMH Reflector

The DAYLIGHT Focus Reflector is designed to concentrate the majority of light from your lamp directly down on to the target canopy area, perfect for square growing areas such as a typical indoor grow tent. Available in remote or connect versions, they make a great choice for grow rooms dedicated to Ceramic Metal Halide technology.

Features

Closed-end reflector made from 98% reflective Miro-Aluminium. Available in remote or connect version for versatile power pack placement. Balanced hanging hooks for easy installation.

Benefits

Ideal for growing over square growing spaces E.G indoor grow tents. Perfect for dedicated Ceramic Metal Halide Grow rooms. Produces an exceptionally uniform Light on Target.

Specifications

Weight: Remote 2.1Kg max. Connect total weight 5Kg max.

Dimensions: 300mm x 300mm x 110mm

Maxibright Daylight Kits Powered by the Maxibright Daylight 315W power pack the Focus Remote & Focus Connect reflectors are compact, highly reflective and suitable for use as standalone lighting or to supplement other lighting. The Daylight 315 power pack fixes simply to the Focus Connect utilising two fixing points. Plug the shortened IEC connectors together and it’s ready to use; a true plug & play product. The Focus Remote can be used as a standard reflector with the ballast wall mounted. The coverage of both reflectors is ideally 1.0m² Available with 4k and 3k CDM bulb.